Ultra Light Lithium Wireless Electric Skateboard Made in the USA

The Best Electric Skateboard on the Market!           Your Personal Urban Transportation Solution.

Home

Why Metroboard?

Why Lithium LiFePO4?

Ways to Use

Specs

Buy Now

Reviews

Pictures & Videos

Blog

 Green Transportation

 

 

Riviera Longboard

(9.75" Wide x 41" Long)

Metroboard Electric Skateboard - Midsize

 
 

Gravity Midsize

(9.5" Wide x 36" Long)

 

 
     

 

Shortboard

(8.5" Wide x 32" Long)

 

Metroboard Electric Skateboard - Shortboard

 

     
 

Honey Mini

(9" Wide x 29" Long)

 

Metroboard Electric Skateboard - Mini

 
     
 

NEW 2013 Pocket Size

Wireless Remote Control

(1.6� Wide x 4.8" Long x 1.4� Thick)

 

 

NEW 2013 IR REMOTE NOW SHIPPING WITH ALL METROBOARDS!

We designed and now build the new 2013 IR remote and receiver ourselves, so we have total control over the quality of the components and the manufacturing (unlike the wii nunchuck remote, which is an off-the-shelf product with unknown (and some known) quality and performance issues. For example, the wii receiver was prone to vibration damage over time. The new remote is functionally equivalent to the nunchuck, but is far more durable, vibration proof, and interference free! So bottom line, you should have trouble free performance both in the short and long term with our new remote and receiver!

 

You may wonder why we use IR (Infrared) instead of RF (Radio Frequency) for the wireless remote.  There are many reasons:

 

INTERFERENCE-FREE:

RF wireless is prone to interference from many RF noise sources such as power lines, Wi-Fi signals,  Bluetooth signals, and even the skateboard motor itself.  IR use a light based transmission which is completely immune from these common RF noise sources.  We use a powerful IR transmitter which doesn't require you to aim it very accurately.  In fact you can move your arm freely while riding and still get excellent results.  You can also use it in either hand!

 

VIBRATION RESISTANCE:

Most RF receivers are built from many small and often delicate components (e.g., timing crystals).  Electric Skateboards are subject to a lot of vibration and so over time these delicate components are subject to vibration related failures.  The IR receiver consists of a single solid state component which is virtually vibration proof.  In fact we built our first 200 Metroboards using an IR system and had an excellent track record for reliability over the long term.  We didn't have even a single failure!

 

COST:

IR systems are inherently much less costly than RF systems.  Keeping the cost down enables us to keep the Metroboard price down as well!

 

Bottom Line: The new Metroboard IR Remote will give you the confidence to use your Metroboard on a daily basis knowing it won't let you down!

 

 

 

 

Check out the Metroboard VARIABLE Speed Remote!

Our latest controller and software allows you to adjust your speed like cruise control on your car, giving you full variable speed anywhere between 2 mph up to the full speed of 19 mph in 1 mph increments. When you press the lower button, you start out at about 2 mph. While pressing the GREEN button, you can increase your speed by pushing the joystick up, and letting go of the joystick when you get to your desired speed. Similarly you can reduce your speed by holding the joystick down and letting go at the desired speed. Braking works similarly but uses the RED button.  When not pressing either button, you will coast!

WIRED vs WIRELESS Remote Control? 

Other electric skateboard sites (such as E-glide) might lead you to believe that wireless remotes are not a good idea on an electric skateboard, but do you really want to be tethered to a 50 lb board moving at 19 mph?  Think about the safety issues associated with that! 

Our wireless remotes are very reliable and use a sophisticated  Infrared (IR) system to communicate with our motor controller.  Because our remotes us a light-based wireless technology, they are unaffected by RF noise!

Multiple riders can ride next to each other without any interference due to multiple IR channels. 

Our wireless remotes create no humming noises whatsoever.  They are completely silent. 

Our wireless remotes will give you freedom to move your hands and body around while riding, creating a truly natural skateboard experience!  The remote can be used in either hand!

 
     
 

 

SPEED

 

Top Speed:

19 mph (31 km/h) - NEW!

 

Variable Speed:

Vary from 2 mph (3 km/h) to 19 mph (31 km/h) in 1 mph (1.6 km/h) increments

 

Speed and Braking Control:

Wireless Hand-Held Compact Remote Control with Smart Coding to prevent interference with nearby riders

 

POWER

 

Motor Output Power:

600 Watt Continuous Rated - NEW!

 

Motor Type:

36 Volt DC Brush Electric Motor, Rare Earth Magnet, High Efficiency (> 80%), Extremely Quiet - NEW!

 

Acceleration:

0 to 19 mph (31 km/h) in 5 seconds - NEW!

 

Braking:

19 mph (31 km/h) to 0 in 5 seconds (Electrical Regenerative Braking, Recharges Batteries).

 

Hill Climbing Ability:

Easily climbs a 9 Degree Slope

  

DISTANCE

 

Range:  (on level ground, with Premium Wheels, minimal starts/stops, 170 lb rider)

        15 miles (24 km) with LiFePO4 36V 5.5 AH batteries (equivalent to 36V 12.0 AH SLA)
 

ENERGY

 

Battery Type: High Power Ultralight Lithium Iron Phosphate (LiFePO4)

 

Battery Capacity:

        36V 5.5 Amp Hour LiFePO4 (equivalent to 12.0 AH SLA) - makes product weight only 18.1 lbs, 8.2 kg (Mini Deck, Premium 85 mm Wheels)

 

Recharge Time: ONLY 3 hours (if batteries are completely drained) - NEW!

 

Charger Type:

Compact Smart Charger, World-Wide Input (100V-240V AC), UL Listed

 

SAFETY

 

Power Levels:

9 Rider Adjustable Power Levels (from Beginner to Advanced), so that rider can fine tune according to their personal riding comfort and skill level.

 

Low Battery Detection:

Warning Beeps disable acceleration to prevent overdischarge of batteries (Brakes still work, however, even when batteries are low)

 

Thermal and Current Overload Protection:

Redundant mechanical and software temperature and current sensing, prevents damage to the electronics under extreme conditions

 

BELLS & WHISTLES

 

Fuel Gauge:

High Accuracy Audible Fuel Gauge activated by the Wireless Remote Control, tells you remaining battery capacity with a series of 1 to 4 beeps (4 beeps: 75-100% capacity remaining, 3 beeps: 50-75% capacity remaining, 2 beeps: 25-50% capacity remaining, 1 beep: 0-25% capacity remaining)

 

Lighting:

Ultra-Bright Flashing Rear (RED) and Front (WHITE) LEDs enhance rider visibility at night

 

Bell:

Warns passersby, activated by the Wireless Remote Control 

 

TRANSMISSION

 

Power Transmission:

Timing Belt and Pulleys

 

Kick Pushing:

Due to low pulley ratio, it is possible to kick push the skateboard (if batteries run out)

 

WEIGHT & SIZE

 

Product Weight: as light as 18.1 lbs (compare this to the competition's bulky 50 pounders!).  See Buy Now Page for the weight of all the different models.

 

Deck Size:

      �         Honey Mini: 9" wide x 29" long, rear kick tail mini deck

        Shortboard: 8.5" wide x 32" long, double kick tail new-school deck

        Gravity Midsize: 9.5" wide x 36" long, rear kick tail hybrid deck

        Longboard: 9.75" wide x 41" long with rear kick tail longboard deck


Wheel Base (distance between trucks):

        Gravity Mini: 16" (41 cm)

        Shortboard: 14.5" (37 cm)

        Gravity Midsize: 20" (51 cm)

        Longboard: 26.3" (67 cm)


Truck Size:

6.25" (159 mm) Hanger Width


Wheel Size:

 Premium High Rebound Seismic 85 mm (75A) Wheels or All-Pavement ABEC-11 97 mm (75A) Wheels

 

Remote Control Size:

1.6� Wide x 4.8" Long x 1.4� Thick (pocket size)

 

RIDER

 

Suggested Maximum Rider Weight for optimal performance:

250 lbs (115 kg)

 

Minimum Suggested Rider Age:

16 years old

 

EFFICIENCY

 

Energy Efficiency:

1500 Miles/Gallon (mpg, Equivalent Electrical Energy), compare to a Toyota Prius Hybrid Car which gets 50 mpg (1/30 of the efficiency of the Metroboard Electric Skateboard)

 

Energy Costs:

$0.0005/mile, compare to a Toyota Prius $0.08/mile (160 times the energy costs of the Metroboard Electric Skateboard)

 

QUALITY

 

Warranty:

6 months

 

Designed, Developed, Tested, and Manufactured in the USA. 

 

INSTRUCTIONS

 

How does the Metroboard Electric Skateboard work? Download the Instructions.

 

 

 
  We stock and sell spare parts to keep your Metroboard Motorized Skateboard up and running:

Metroboard Electric Skateboard - Spare Parts

 
 
 

Home  |   Links   |   About   |   Contact  

 

360.335.3211  |  [email protected]

� Kef Tech, LLC, 2013