1. Home
  2. chevron_right
  3. E-Skate Shop
  4. chevron_right
  5. Electric Skateboard Parts
  6. chevron_right
  7. Caliber II Fifty Raw 184mm Longboard Trucks – SET OF 2

Caliber II Fifty Raw 184mm Longboard Trucks – SET OF 2

$50 $30

Caliber II Fifty Raw 184mm Longboard Trucks – SET OF 2

SKU: CALIBER-II-50-1 Category:


Caliber II Fifty Raw 184mm Longboard Trucks – SET OF 2

  • Updated inner/outer steps on bushing seat -The new Inner-Step provides an increased contact area with the bushing, resulting in dramatically higher rebound and overall responsiveness. The Inner-Step diameter has been adjusted to 25.4 mm to eliminate all slop. The new Outer-Step is now a perfect circle with a 31.5mm diameter, creating a perfect no-slop-fit with oversized aftermarket bushing combinations.
  • Pivot with tighter tolerance and updated chamfer – By decreasing our pivot cup seat chamfer, we have increased pivot cup surface area contact with the baseplate. This creates a snugger fit for the pivot pin and prevents side-to-side play as the pivot cup breaks in.
  • Circular kingpin hole with updated diameter – With a diameter of 17.4mm, our kingpin hole has been updated to match the specs of our precision trucks. A circular hole provides a consistent and uniform lean, while also allowing proper clearance to avoid kingpin bite on the hanger.
  • Increased truck strength – With a new in-house heat treatment process at our manufacturing facility, we are able to strengthen our trucks by as much as 40%
  • Pressed-in grade 8 hex head kingpin – We have removed all slop and play by switching to a pressed-in kingpin. This provides maximum control and responsiveness through corners, but can still be hammered out and replaced with different length removable kingpins for extra levels of customization.
  • Reinforced baseplate – We have reinforced our baseplate by thickening the metal towards the kingpin. This provides increased strength and resistance against high speed impact.
  • Thinner paints for tightened tolerances – Powder coats are very thick and can throw off tolerances and affect overall truck performance. We have switched over to a thinner paint system for optimal performance.


Additional information


184 mm 50 deg